Reasons Your Water Heater Isn't Functioning

Blog Article

We've stumbled on this post about What Would Cause My Electric Water Heater to Stop Working? directly below on the internet and think it made perfect sense to relate it with you here.

Several modern-day houses use an electric water heater for their heating system, due to its convenience and also convenience of use. Nevertheless, much like any other electrical appliances, troubles might occur with its usage, unexpectedly. It can be actually irritating to get up to a chilly shower instead of a warm one or having your bathroom with water that isn't hot enough or perhaps also warm. Whatever the case may be, hot water heater issues can be rather nerve-racking. The good news is, we have actually made a listing of feasible remedies to your hot water heater issues. There are a number of aspects that could create a number of these troubles, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the issue is, getting it fixed must not position too much of a problem if you follow these actions:

Check Your Power Supply:

As standard as this may appear, it is extremely necessary. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water instantly stops working is to validate that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the breaker is the problem, merely turn it on and off once again. Change any type of busted or worn-out fuse. Examine the home appliance with power after these adjustments to see if it's now functioning.

Check the Burner in the Water Heater:

If it's not a power issue, then try checking out your heating element if it is still functioning. Evaluate each of your burner to be sure the issue isn't with any one of them. If any of them is damaged, replace that part and afterwards examine whether the hot water is back on.

Inspect Your Thermostat:

If your hot water heater still isn't working or the water appearing isn't warm enough, you might require to check the temperature level settings on your upper thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open up the access panel as well as press the red switch for temperature reset over the thermostat. This need to help heat up the water. Transform the circuit breaker back on and inspect if the trouble has been fixed.

Call An Expert:

If after changing all faulty parts as well as resetting your temperature level, the water heater still isn't working, you might require to contact an expert plumber for a professional viewpoint. The trouble with your heater could be that the hot and cold taps have actually been switched over or it might be undersized for the amount of hot water needed in your house. Whatever the instance might be, a professional plumber would help fix the issue.

Verdict

Hot water heater troubles are not always major. A lot of them are because of small concerns like a blown fuse or damaged burner. Changing the faulty parts should do the trick. Nevertheless, if you are still not able to fix the issue, give a call to your nearby plumber ahead to get it dealt with.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/

Hopefully you enjoyed reading our article about How to Troubleshoot and Repair an Electric Water Heater. Thanks a lot for spending some time to read our content. Liked our blog? Please share it. Let other people locate it. Thanks for your time spent reading it.

Get A Free Quote

Report this page

REASONS YOUR WATER HEATER ISN'T FUNCTIONING

Reasons Your Water Heater Isn't Functioning